Showing posts with label Equipment. Show all posts
Showing posts with label Equipment. Show all posts

Sunday, April 24, 2011

Kegging, Conditioning and Fermentation Setup

I have all of my kegging, conditioning and fermentation equipment set up in the furnace room of my basement.  Following are some pics of the setup.

I ferment in a temperature controlled chest freezer in a 15.5 gallon Sanke keg.  My batches are usually 10 gallons so this gives me plenty of head space for fermentation.  I use the Sanke fermentation conversion kit from brewershardware.com.  It has a dip tube, blowoff port, and a port for a temperature probe.

 Closed fermentation freezer with temperature control unit.
 Open fermentation freezer showing 15.5 gal. Sanke keg.
 Close-up of Sanke Fermentation Conversion Kit from brewershardware.com
Temperature control maintaining the Scottish 80 Shilling at 65 degrees.


I condition in a temperature controlled freezer.  It has room for 4 kegs plus some bottles.  I am planning on building a collar at some point to give me space for 3 more kegs.

 Closed conditioning freezer
 Open conditioning freezer.
Conditioning freezer temperature control keeping the kegs at just over 40 degrees.

I converted my old refrigerator into my kegerator.  I store my hops in the freezer portion.  The kegerator has 5 taps and room for 6 kegs.  I have 6 different secondary CO2 regulators to dial in the carbonation level of the beers on tap.  I use a 20 lb CO2 tank to supply the CO2.

 Front of kegerator.
Close up of taps.
 Back of taps coming through the door.
 Six kegs with a bunch of air and beverage hoses.
Secondary CO2 regulators.
 20 lb. CO2 tank.
Hops in the freezer, each bag has 4 oz. of hops.

I also have a spare mini-fridge that I use to store some of the commercial beers I have as well as my dry yeast.
Closed mini-fridge.
Freshly stocked mini-fridge from my recent trip from Portland.

So that's my "beer room" in my basement.  Thanks for looking.

Cheers!

Saturday, March 26, 2011

New RIMS System

I recently received my RIMS tube that I ordered from brewershardware.com.  I relied on a lot of information from homebrewtalk.com to build the system.  I used the SYL-2362 PID from auberins.com to control the temperature.  Following are some pics.

Front of control box, the top number on the PID is the temperature of my wort and the bottom number is the target temperature.  The two switches control the PID and the pump.
RIMS tube purchased from brewershardware.com using camlock quick disconnects, a 1500 watt low-density heating element from plumbingsupply.com, and an RTD sensor from auberins.com.

Plug that is connected to the PID/element switch.

Plug that is connected to the pump switch.

Recirculating mash through the RIMS tube.

Friday, March 4, 2011

02/27/11 Brewday Smoked Robust Porter

I brewed a 10 gallon batch of a Smoked Robust Porter based on Jamil Zainasheff's recipe from Brewing Classic Styles.  In this post I'll detail some of my equipment and process from pictures from my brewday.  I use the following terms throughout my post:
HLT - Hot Liquor Tank
MLT - Mash Lauter Tun
BK - Boil Kettle

My recipe was as follows from Beersmith:

Recipe: Kyle's Smoked Robust Porter
Style: Wood Aged Beer
TYPE: All Grain

Recipe Specifications
--------------------------
Batch Size: 11.00 gal     
Boil Size: 13.69 gal
Estimated OG: 1.072 SG
Estimated Color: 29.0 SRM
Estimated IBU: 30.1 IBU
Brewhouse Efficiency: 81.00 %
Boil Time: 60 Minutes

Ingredients:
------------
Amount        Item                                      Type         % or IBU     
13.00 lb      Pale Malt (2 Row) US (2.0 SRM)            Grain        47.71 %      
8.00 lb       Smoked Malt (9.0 SRM)                     Grain        29.36 %      
1.50 lb       Caramel/Crystal Malt - 60L (60.0 SRM)     Grain        5.50 %       
1.50 lb       Caramel/Crystal Malt - 80L (80.0 SRM)     Grain        5.50 %       
1.50 lb       Munich Malt - 10L (10.0 SRM)              Grain        5.50 %       
1.00 lb       Pale Chocolate Malt  (200.0 SRM)          Grain        3.67 %       
0.75 lb       Carafa II (412.0 SRM)                     Grain        2.75 %       
2.00 oz       Fuggles [5.10 %]  (60 min)                Hops         19.5 IBU     
1.50 oz       Williamette [4.80 %]  (30 min)            Hops         7.0 IBU      
1.50 oz       Williamette [4.80 %]  (15 min)            Hops         3.7 IBU      
1.00 oz       Williamette [4.80 %]  (0 min)             Hops          -           
1.00 oz       Fuggles [5.10 %]  (0 min)                 Hops          -           
0.55 tsp      Yeast Nutrient (Boil 10.0 min)            Misc                      
2.00 oz       Sanitize Pump (Boil 5.0 min)              Misc                      
2 Pkgs        US-05 American Ale (Danstar #US-05 )      Yeast-Ale                 


Mash Schedule: Single Infusion, Medium Body, No Mash Out
Total Grain Weight: 27.25 lb
----------------------------
Single Infusion, Medium Body, No Mash Out
Step Time     Name               Description                         Step Temp    
60 min        Mash In            Add 40.88 qt of water at 165.4 F    154.0 F      


I ferment in a Sanke keg with a fermentation kit that I purchased from Brewers Hardware. 
Boiling water in Sanke to sanitize.

Steam coming out of racking cane as well as blow-off tube.

Close-up of Brewers Hardware Sanke Fermentation Kit


Grain bill ready for crushing in mill

Grain mill ready to go!!

Grain mill with 27.5 lbs of grain.
 
Close-up of my crush.

Grain crushed and ready to go.

Water filter with carbon filter to remove the chlorine

Filling my MLT with strike water.

Inside of MLT when adding strike water.

MLT with strike water, the water was around 40 degrees.

Starting the Blichmann Burner.

I have mashed in the grains and started recirculation for the mash.

Recirculating the mash.

Adding water the HLT for sparge-out.

Sparge out from the HLT (top) to the MLT (left) to the BK (right).

Fly sparging with sparge water added to the top of the grain bed.

Wort coming from the MLT to the BK.

Sparge almost complete!!

Front of BK with sparge almost finished.

 MLT after sparge is complete.


I failed to take any pictures after the sparge.  I'll take pictures from the beginning of the boil on during my next brew session.







My Equipment

I recently upgraded a bunch of my equipment and my brew stand.

 Blichmann Top Tier System with 3 burner tiers.

40 plate chiller from kegcowboy.com and march pump

MLT with false bottom from Jaybird at HBT.com

Stainless mash paddle from Jaybird at HBT.com

20 gallon Blichmann Boilermaker kettle with HopBlocker

Whirlpool paddle from Jaybird at HBT.com